Hinge C/C 45mm in fiberglass-reinforced Polymide, pre-assembled. Used for conventional doors/hatches. Can also be used as angled bracket. Distance between dorr and frame on the side of the hinge: 1 mm when JSM D1C is mounted on the outside and 16 mm if it is mounted in the inside, between dorr and frame. 10 mm between dorr and frame on the other side.
Hinge C/C 45mm in fiberglass-reinforced Polymide, pre-assembled. Used for conventional doors/hatches. Can also be used as angled bracket. Distance between dorr and frame on the side of the hinge: 1 mm when JSM D1C is mounted on the outside and 16 mm if it is mounted in the inside, between dorr and frame. 10 mm between dorr and frame on the other side.
Screws and fasteners for this accessory is included.
Troax Nordic
Troax Nordic AB
Tyngel 34
335 74 Hillerstorp
Sverige
Postal address
Troax Nordic AB
335 04 Hillerstorp, Box 89
Sverige
Phone +46 (0)370 828 00
E-postadress info.se@troax.com
Website www.troax.com
